U0689
Lost Communication With Turbocharger/Supercharger B Temperature Sensor
Twin-charger engines may monitor a temperature at the second charger, for instance to protect the compressor or turbine of charger B from overheating; CARB's diesel data list includes compressor inlet as well as turbine inlet and outlet temperatures. U0689 means the reading of the temperature sensor for charger B arrives over a digital link and that link has failed. Such a channel can be built into a combined pressure sensor, as Infineon's KP276 shows with its SENT-transmitted NTC input. No manufacturer documents U0689 publicly, and none of the Ford or GM summaries examined contains it. Circuit faults of an analog sensor are P2B8F to P2B92, charger A's link loss is U0643. With the value gone, the controller may protect the charger by limiting boost.
Possible causes
- Wiring near charger B damaged by heat high
- Connector loose or corroded medium
- Temperature sensor or its interface electronics failed medium
Symptoms
- Check engine light
- Boost reduced as a precaution
- Otherwise often unchanged driving
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0689
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.