OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0686

Lost Communication With Catalyst Temperature Bank 2 Sensor 1

Bank 2 exists only on engines whose cylinder rows feed separate exhaust paths, so U0686 belongs to V or flat engines with one converter per side. It means the first catalyst temperature probe of that second bank has stopped delivering digital messages. Such probes are often a thermocouple paired with a small electronics unit; Sensience, for example, sells N-type probes rated to 1000 °C whose module converts the reading to SENT or CAN. The module and its lead sit close to hot exhaust parts, which makes heat damage a typical cause. None of the carmakers describes this code in public material. The analog equivalents are P0435 to P0438; the same position on bank 1 is U0684. CARB requires a dedicated code once a digital input goes mute.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 86

Possible causes

  • Sensor electronics on bank 2 damaged by heat high
  • Harness on the bank 2 side chafed or melted medium
  • Connector corroded medium
  • Engine controller input fault low

Symptoms

  • Check engine light
  • Catalyst monitor for bank 2 not completed

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0686

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication