U0685
Lost Communication With Catalyst Temperature Bank 1 Sensor 2
Where a converter carries two temperature probes, one usually sits ahead of the brick and one behind it, so that the heat released by the reaction shows up as a rise between them. Sensor 2 on bank 1 is the second, downstream position. U0685 means this probe reports over a digital link and its messages no longer arrive. No manufacturer documents this code publicly, so thresholds and debounce times are unknown. Without the second reading, the comparison with sensor 1 is lost: the correlation code P046A cannot be judged, and any strategy that uses the temperature rise as a sign of catalyst activity loses its input. Analog faults of the same probe are P042A to P042D; sensor 1 has U0684. CARB requires a separate code for digital inputs that fall silent.
Possible causes
- Lead of the downstream probe damaged by heat, stones or road salt high
- Sensor electronics failed medium
- Connector corroded or not fully latched medium
Symptoms
- Check engine light
- Catalyst monitor or sensor comparison stays incomplete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0685
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.