OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0683

Lost Communication With Throttle/Pedal Position Sensor/Switch F

A third pedal track F is rare. It appears where a pedal module carries three signals, or where the F letter is used for an extra switch or a throttle input; the correlation codes P2139 (D/F), P2140 (E/F) and P212F (F/G) show that the scheme pairs F both with the pedal tracks and with throttle sensor G. U0683 means that digital frames for input F have stopped or fail their checks. No manufacturer documents the code publicly, and neither the Ford nor the GM tables examined contain any F input at all: both work with two pedal tracks, D and E. Analog faults of F would be P2130 to P2134. The effect depends on the role of F; with one redundant track gone, the controller usually limits power and the warning lamp comes on.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 83

Possible causes

  • Wiring for input F open, shorted or chafed high
  • Connector at the pedal or sensor module loose or corroded medium
  • Sensor electronics for input F failed medium

Symptoms

  • Check engine light
  • Reduced power or limited throttle response
  • Additional correlation codes possible

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0683

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication