OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U067C

Lost Communication With Fan 3

Some engines need a third electric cooling fan, for instance for a charge-air or auxiliary radiator, and LIN lets each fan carry its own speed electronics. GM's 2025 diesel table 25OBDG04B uses U067C for cooling fan 3: the response frame CFM3_Rsp must be missing for at least 2,437.5 ms, the LIN channel enabled and battery voltage above 11 V; the code is Type B, so the MIL lights after two trips. While it is active GM suspends the fan 3 speed checks, P2CBB for running slower than modelled and P30F2/P30F3 for feedback out of range, the high limit being 4,000 rpm. On the engines of GM's 23OBDG07 and 24OBDG07 the same fan instead sets the GM-specific U112A on a third LIN line. Watch engine temperature under load.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 7C

Possible causes

  • LIN wire to fan 3 chafed or open high
  • High-current supply, fuse or ground of fan 3 faulty medium
  • Fan 3 controller electronics failed medium
  • Fan connector corroded by road spray low

Symptoms

  • Check engine light after two trips
  • High coolant or charge-air temperature at low speed or when towing
  • Fan 3 silent or running constantly

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U067C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication