U067A
Lost Communication With Transmission Fluid Pressure Sensor/Switch B
Sensor B is the second pressure measuring point. In GM's CVT table 25OBDG03A it reads the secondary pulley, whose pressure sets the clamping force on the belt; its plausibility check runs only above 1,200 rpm with line pressure over 1,000 kPa and a secondary command above 500 kPa. In GM's 24OBDG07 B belongs to clutch 2, fed from its own reference VREF2, and Ford's 2024 summary checks TFP B with P0846 to P0848. U067A stands for a digital sensor B whose messages have stopped. No manufacturer documents this code publicly. With the clamping or clutch pressure unknown, the controller has to work with assumed values, which can mean firmer shifts, limited torque or a fixed gear. If A is still readable, the fault sits in B's own branch.
Possible causes
- Internal wiring to sensor B damaged high
- Pressure sensor B failed medium
- Separate sensor supply for B faulty medium
- Transmission controller fault low
Symptoms
- Firm shifts or engagement
- Reduced engine torque, limp mode
- Warning light on
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U067A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.