OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0677

Lost Communication With Fuel Level Sensor B

A second level sender is needed when a tank has two chambers, as in saddle tanks that straddle the driveshaft, or when a vehicle carries a second tank. GM's 25OBDG03B calls it sensor 2 of the secondary tank, used on vehicles with two senders and a mechanical transfer pump; its circuit checks fail below 10 % or above 60 % of the 5 V range in 40 of 50 samples (P2067/P2068, Type B). Ford's 2024 summary runs sender B through the same resistance, noise and stuck checks as A and adds P25B2 for a stuck reading on either. U0677 is the digital variant: sender B's messages stop arriving. No manufacturer documents it publicly. The gauge then misjudges the part of the tank sender B covers, and range and EVAP readiness suffer.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 77

Possible causes

  • Wiring to the secondary-chamber sender damaged high
  • Sender B electronics failed medium
  • Connector at the secondary flange corroded medium
  • Receiving module or software faulty low

Symptoms

  • Gauge drops suddenly or never shows full
  • Range estimate inaccurate
  • Check engine light

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0677

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication