U0674
Lost Communication With Wastegate Position Sensor B
Electric wastegate actuators need position feedback so the controller can hold the turbine bypass at the commanded opening. On twin-turbo engines the second charger gets its own sensor, and U0674 says the digital frames from that sensor B have stopped or are corrupt. GM uses the sibling U0644 for wastegate A over SENT (25OBDG03B, Type A), yet none of the GM tables lists U0674. Ford's 2024 gasoline summary goes the analog way for charger B: P2ABB below 0.50 V or P2ABC above 4.50 V within 4 s, and a position error beyond 20 mm sets P25B5/P25B6. So no published source uses U0674 itself. CARB counts wastegate valve position among the diesel data items. Expect boost on that charger to be reduced or the wastegate held open.
Possible causes
- Wiring to the wastegate B actuator heat-damaged or chafed high
- Actuator connector loose or corroded medium
- Position sensor inside the actuator failed medium
- Weak supply voltage or poor ground low
Symptoms
- Check engine light
- Reduced power, boost limited on one charger
- Sluggish response under load
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0674
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.