OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U066E

Lost Communication With Charge Air Cooler Temperature Sensor Bank 2

A bank 2 charge air temperature only exists on V or boxer engines that run one turbocharger and one intercooler per cylinder bank. There the controller can compare both sides, and a mismatch belongs to P007F, the bank 1/bank 2 correlation code. U066E is the digital-link failure for the bank 2 sensor: its frames are missing or unusable, so that comparison and any per-bank boost correction lose their input. None of the Ford or GM OBD summaries examined shows a bank 2 charge air sensor at all, let alone a digital one, so no manufacturer can be named; analog faults would be P00A0 to P00A4. CARB's (f)(7.2.4) undercooling monitor applies per cooler. The controller substitutes the bank 1 value or a model; the driver rarely notices more than the warning lamp.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 6E

Possible causes

  • Wiring to the bank 2 charge air sensor damaged, often routed near the hot side high
  • Connector at the bank 2 charge air pipe loose or oily medium
  • Bank 2 sensor electronics failed medium

Symptoms

  • Check engine light
  • Possible additional bank correlation code (P007F)
  • Mostly unchanged driving behaviour

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for U066E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication