U066D
Lost Communication With Charge Air Cooler Temperature Sensor Bank 1
The temperature of the charge air behind the intercooler tells the engine controller how dense the intake charge is and whether the cooler still removes enough heat; CARB lists charge air cooler temperature in the data diesel vehicles must report and requires an undercooling monitor in (f)(7.2.4). U066D is reserved for a bank 1 sensor that delivers its reading as a digital frame, for example as the NTC channel of a SENT pressure sensor such as Infineon's KP276. No manufacturer documents U066D publicly: Ford (2024 gasoline, 2023 diesel) and GM (25OBDG04A, Type B) read their bank 1 sensors analog and set P007C/P007D when voltage or resistance leaves its range. Without the value the controller works from a model, and boost may be trimmed.
Possible causes
- Signal or supply wire to the charge air sensor open or chafed high
- Oily or corroded connector at the charge air pipe medium
- Digital sensor (often combined with boost pressure) failed medium
- Engine controller input or software fault low
Symptoms
- Check engine light
- Slightly reduced power at high load
- Often no noticeable change in normal driving
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for U066D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.