U0667
Lost Communication With Engine Oil Temperature Sensor A
Engine oil temperature feeds warm-up strategies, injection and protection functions, and on recent engines the sensor sends it digitally over SENT. U0667 says that link has failed. Ford's 2023 diesel OBD summary lists the code in its group of SENT sensor monitors, together with the oil pressure sensor (U0600), the mass air flow sensor and others: it sets when the SENT sensor reports a communication error, checked continuously, with 5 s needed to mature. In that table P0195 is also triggered by a SENT communication error, so both may appear together, while the range check P0196 is a separate test. Analog sensors use P0195 to P0199. With no valid reading the controller substitutes a modelled temperature, which can cost some smoothness or power; Ford treats the fault as part of its OBD monitoring.
Possible causes
- Oil wicking into the sensor connector high
- Sensor signal, 5 V supply or ground wire damaged medium
- Digital oil temperature sensor failed medium
- Engine controller SENT input faulty low
Symptoms
- Check engine light
- P0195 stored at the same time
- Oil temperature reading missing in the cluster or scan tool
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for U0667
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.