OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0663

Lost Communication With Rear Mode Actuator

The rear mode actuator steers rear-seat air between upper outlets, such as console or roof vents, and the rear footwell. Hanon's US 11,305,608 shows a dome-shaped rear mode door doing exactly this between console vent and rear floor vent. GM uses the code: bulletin 23-NA-206 lists U0663-00, under GM's own name with the suffix Left, in the body control module of Cadillac, Corvette, Tahoe, Suburban and Yukon models from 2020 or 2021 on, as a history entry caused by software that sets no lamp and can be ignored unless it is current. The added word Left suggests GM may split rear distribution by side. When the link is truly lost, rear passengers get air only from the outlets that were open last, for instance warm air at the face or cold air at the feet.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 63

Possible causes

  • Software timing in the body or climate module storing a false history code (GM) high
  • Rear mode actuator failed medium
  • Harness to the rear HVAC unit or console damaged low

Symptoms

  • No symptom if the code is only stored as history
  • Rear air stuck at the console or roof vents or at the floor
  • Rear mode button has no effect

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0663

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication