OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0661

Lost Communication With Right Rear Temperature Actuator A

A right rear temperature actuator is only fitted where the rear seats are split into left and right climate zones, as in four-zone systems of large sedans, SUVs and vans. Actuator A on the right is the counterpart of U065F on the left, so when this code is stored the passenger behind the front passenger seat loses temperature control while the left rear zone still works. No maker documents U0661 publicly; GM's bulletin 23-NA-206 names only the left-hand rear actuators. Hanon's US 11,305,608 shows the door arrangement that such zones rely on. Because both rear sides often share one harness and LIN segment, a single right-side code points toward the actuator itself; right and left together point toward the common wiring or the master.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 61

Possible causes

  • Right rear temperature actuator A failed high
  • Actuator plug in the right rear duct area loose or corroded medium
  • Shared rear LIN segment faulty (then usually several rear codes) low

Symptoms

  • Right rear zone stays at one temperature
  • Rear right temperature buttons have no effect
  • Left rear zone continues to work normally

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0661

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication