OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0660

Lost Communication With Left Rear Temperature Actuator B

Temperature actuator B is the second door for the same rear left zone that A serves. Where a rear zone uses two doors, one typically sets the split between cold and heated air and the other trims the mix further downstream, like the downstream rear door in Hanon's US 11,305,608; makers do not publish which letter goes to which. U0660 means the climate master gets no answer from actuator B over its LIN line. There is no public maker document for U0660; GM's 23-NA-206 lists only the A actuator on the left rear. Because A still answers, the rear left zone usually keeps some control: temperatures can be reached but overshoot, lag or sit a few degrees off. B alone missing is a narrow fault that points to that actuator or its own branch of wiring.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 60

Possible causes

  • Actuator B electronics or motor failed high
  • Fault in the wiring branch or plug that only actuator B uses medium
  • Replacement actuator not assigned or calibrated by the scan tool low

Symptoms

  • Rear left temperature drifts or overshoots the set value
  • Rear left zone reacts slowly to temperature changes

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0660

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication