OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U065F

Lost Communication With Left Rear Temperature Actuator A

Vehicles with a separately controlled rear climate zone need their own temperature doors for the rear outlets, and in a split rear system the left side may use two of them, labelled A and B. Hanon's US 11,305,608 shows why two can be needed: one door ahead of the heater core and a second behind it mixing warm air into the rear cold-air duct. Which door counts as A is up to the maker. GM uses this code: bulletin 23-NA-206 lists U065F-00 in the body control module of the CT4, CT5, Corvette, Escalade, Tahoe, Suburban and Yukon from model year 2020 or 2021 on as a history code from software anomalies that turns on no lamp and may be ignored; if it is current, normal diagnosis applies. A real loss leaves the rear left air at one temperature.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 5F

Possible causes

  • Software timing between modules logs a false history code (GM) high
  • Left rear temperature actuator A failed medium
  • Rear HVAC harness or connector damaged in the floor or rear quarter low

Symptoms

  • Often none when the code is only stored as history
  • Rear left air stays hot or cold
  • Rear temperature control has no effect on the left

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U065F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication