OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U065E

Lost Communication With Ram Air Actuator

At speed, the wind pushes extra outside air through the cowl inlet into the climate housing. Some vehicles therefore fit the fresh-air path with a motorised ram air flap that narrows the opening as dynamic pressure rises, so airflow and noise stay steady; Behr's US 5,645,479 nests it with the recirculation flap, and Daimler's DE 10 2010 025 623 drives it through a non-linear linkage for fine throttling near closed. Others, like Honda in WO 2012/115719, use the inlet door for the same job and have no separate flap. U065E means the master has lost its LIN link to that flap's actuator. No maker documents the code publicly. A flap stuck open lets the cabin airflow surge and rush at motorway speed; one stuck nearly shut starves the vents at low speed.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 5E

Possible causes

  • Ram air flap actuator electronics failed high
  • Moisture or debris from the cowl reaching the actuator connector medium
  • LIN wire to the ram air actuator chafed or disconnected low

Symptoms

  • Airflow rises noticeably with road speed
  • Air rush noise from the vents at high speed
  • Weak airflow at low speed if the flap stopped nearly closed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U065E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication