U065D
Lost Communication With Air Intake Actuator
The air intake actuator swings the inlet door between outside air and cabin air. Modern controllers move it on their own: Ford's SSM 51726 notes that the 2021-23 Bronco opens the inlet door to about half every 30 to 60 minutes in recirculation to refresh the cabin, and onsemi's TND416 describes stepper-driven recirculation flaps that find their end stop by stall detection and save compressor energy by reusing cooled air. U065D is set when the climate master hears nothing more from this actuator. No maker documents the code in public. Which way it hurts depends on where the door stopped: stuck in recirculation, humidity builds and the glass fogs; stuck on fresh air, exhaust odour enters in traffic and maximum cooling weakens.
Possible causes
- Inlet door actuator electronics failed high
- Water ingress at the blower housing reaching the actuator plug medium
- LIN or supply wire to the inlet actuator damaged medium
Symptoms
- Recirculation button has no effect
- Windows fog quickly when the door is stuck on recirculation
- Outside smells enter the cabin when it is stuck on fresh air
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U065D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.