OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U065A

Lost Communication With Right Front Temperature Actuator

The right front temperature actuator only exists where the right-hand front seat gets its own blend door, as in dual-zone systems; single-zone cars move one door for both sides and never run this check. GM lists U065A next to U0659 in its 2025 BCM tables, watching the frame AHDA05_Rsp with the same 11.5 s limit and Type B rating; in 25OBDG04B that slave is calibrated as not present, so the monitor stays idle on that build. Its GM partners are U1410 for corrupt counters and B2B06, B2B2B and B2B2C for travel faults. FCA shows how a failing right door feels: 2014-15 Town and Country and Grand Caravan blew hot air from the right vents until the actuator passed a wiTECH calibration or was renewed. Here the link itself is gone, so the right side holds its last mix.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 5A

Possible causes

  • Right temperature actuator electronics or motor failed high
  • Wire to the actuator damaged behind the glovebox or console side panel medium
  • Climate module configured for the wrong number of zones after replacement low

Symptoms

  • Passenger side blows hot or cold no matter what is selected
  • Right temperature setting has no effect while the left side works
  • MIL possible on GM models with the code rated Type B

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U065A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication