OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0658

Lost Communication With Windshield Temperature Sensor

To keep the glass clear before it mists, an automatic climate system can compare the temperature of the inner windshield surface with the cabin air's dew point right in front of it. Suppliers such as Sensirion (SAAF) and ScioSense (WSS2) build this into one small module at the mirror base that computes the dew point itself and reports over LIN at 19.2 kBd. U0658 is stored when the climate master stops getting answers from that glass sensor. No maker documents this exact code in public; FCA logs the same kind of loss as its own U1190 in the BCM, and a Pacifica case shows it appearing during remote start with nothing to replace. Without the reading the controller can only react once fog is visible, so the windshield may mist up in damp or cold weather.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 58

Possible causes

  • Sensor not clipped back, unplugged or without glass contact after windshield replacement high
  • Loose or damaged plug or LIN wire at the mirror base or headliner medium
  • Electronics of the humidity and glass temperature module failed medium
  • Code logged in a wake-up phase such as remote start without a real fault low

Symptoms

  • Windshield fogs before the climate system responds
  • Automatic defog or anti-fog function inactive or less effective
  • Other sensors on the same mirror-base LIN line may also be missing

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for U0658

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication