OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0655

Lost Communication With Diesel Intake Air Flow B Position Sensor

Some diesels carry a second intake air flow valve, labelled B; which flap gets that letter depends on the engine layout and the maker. When its angle sensor is a digital SENT unit, U0655 reports that the engine controller no longer receives usable position frames from it. No manufacturer documents this code in public. GM's 2025 diesel tables give SENT link codes only to valve A (U0654, Type A, 6.25 ms checks), and CARB requires a separate code whenever a digital input stops communicating. Analog sensor faults on the B side are P2396 to P239A, drive faults P2390 to P2395. Expect the flap to be switched off and left to its spring, with EGR control and regeneration limited and a likely MIL on emission-certified engines.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 55

Possible causes

  • Contaminated or loose connector at throttle unit B high
  • Signal, supply or ground wire to sensor B damaged medium
  • Digital position sensor of valve B failed medium
  • Engine controller input fault low

Symptoms

  • Check engine light
  • Particulate filter regeneration postponed or blocked
  • Little change in drivability in many cases

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0655

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication