U0654
Lost Communication With Diesel Intake Air Flow A Position Sensor
Diesel intake air flow valve A is the throttle ahead of the intake manifold: it creates the vacuum for high EGR rates, trims airflow for filter regeneration and shuts at switch-off. GM's 2025 diesel tables 25OBDG04A and 25OBDG04B read its angle by SENT and set U0654 when the data stop refreshing for more than 6.25 ms while the line is stuck low or high, a frame is faulty, or the counters freeze. 04A needs 200 of 250 checks, 04B 480 of 600, both every 6.25 ms after cranking with over 11 V at the relay. Type A means MIL in the first trip. GM evaluates the out-of-range codes P02E8 and P02E9 only while no such link fault exists. Ford's 2023 diesels monitor the same throttle with P02E8/P02E9 and do not list U0654. Sensor B has U0655.
Possible causes
- Oil, soot or corrosion in the throttle body connector high
- SENT signal, supply or ground wire damaged medium
- Position sensor in the throttle unit failed (usually replaced with the unit) medium
- Engine controller SENT input fault low
Symptoms
- MIL in the first trip
- EGR control restricted, particulate filter regeneration delayed
- Engine may shake more at switch-off
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0654
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.