OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0653

Lost Communication With EGR Sensor C

On GM's 2025 diesel with high- and low-pressure EGR (table 25OBDG04B), EGR sensor C is the SENT position sensor of the low-pressure valve, which as usual for such loops takes exhaust after the particulate filter and feeds it ahead of the compressor. Oddly, the table's text calls this valve the B position sensor while filing its codes under C. U0653 is stored when 480 of 600 checks every 6.25 ms see outdated data while the protocol sits permanently low or high, a corrupt message, or counters that froze; GM rates this Type A, lighting the MIL on the first trip. A raw level below 1 % on the same sensor is P044C, and P044A to P044E cover the analog faults of sensor C. While the low-pressure valve position is unknown, its loop is shut and the high-pressure loop has to cover alone.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 53

Possible causes

  • Wiring to the low-pressure EGR valve damaged near the exhaust high
  • Connector corroded by road splash medium
  • Position sensor in the low-pressure EGR valve failed medium
  • Engine controller input fault low

Symptoms

  • MIL on from the first trip
  • Low-pressure EGR disabled, higher NOx
  • EGR monitor not ready

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0653

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication