OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U064D

Lost Communication With Trailer Brake Control Switch

Trucks with a factory trailer brake controller carry a dash switch with gain buttons and a manual slider that lets the driver apply only the trailer brakes. On current designs this switch is a small electronic unit that reports to the brake controller, which is why GM's 2024 campaign N242442100 for the 2022 Silverado and Sierra pairs a new switch with reprogramming of the cluster and the brake module. U064D marks a broken data link to that switch. No maker documents this code in public; GM logs switch faults as C159C, and in PIT5948B and campaign N222384930 a defective switch brought up the Service Trailer Brake warning and disabled trailer braking for that key cycle. The whole controller module silent is U0137, bad data from it U0438. Brake the trailer only with caution until fixed.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 4D

Possible causes

  • Trailer brake control switch electronics failed high
  • Switch connector behind the dash trim loose or not seated medium
  • Damaged data or supply wire to the switch low
  • Brake or cluster software not matched to a replaced switch low

Symptoms

  • Service trailer brake message in the cluster
  • Gain buttons and manual slider have no effect
  • Electric trailer brakes not applied when braking

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U064D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication