OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0648

Lost Communication With Motor Electronics Coolant Pump C

U0648 belongs to a third digitally controlled pump in the motor electronics cooling, labelled C, which only more elaborate layouts carry, for example a generator inverter with its own loop. The fault means the pump has dropped off the bus. No carmaker publishes a description of U0648, so which component pump C cools has to be taken from the vehicle's own service information. CARB's rule for inverter thermal management, (e)(15.2.3)(B)(ii), still applies to hybrids. A pump with plain wiring would report P2BD4 to P2BD7 or the internal faults P2D0A to P2D0E. If A, B and C drop out together, look for a shared cause such as a common fuse, ground point or bus master rather than three failed pumps.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 48

Possible causes

  • Shared fuse or ground point of the pumps faulty (several pump codes at once) medium
  • Data or supply line to pump C damaged high
  • Pump C controller failed medium

Symptoms

  • Hybrid or EV warning lamp
  • Reduced power from the electric machine cooled by pump C

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0648

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication