U0643
Lost Communication With Turbocharger/Supercharger A Temperature Sensor
This sensor reports a temperature at charger A, whose exact measuring point the J2012 title leaves open; depending on the design it can watch the compressor outlet or the hot side. GM's tables define charger A as the first one in the exhaust path on series layouts and the bank 1 charger on parallel ones. When the sensor is a digital part, for instance with SENT output, the controller sets U0643 as soon as valid frames stop arriving; analog wiring and range faults go to P2B6E to P2B71 instead, and charger B uses U0689. No manufacturer documents U0643 publicly. Without the temperature the engine management loses a protection input for the charger and usually caps boost, so the engine can feel weak under load.
Possible causes
- Wiring near the charger damaged by heat or chafing high
- Connector loose or corroded medium
- Sensor electronics failed medium
- Engine controller input fault low
Symptoms
- MIL on
- Reduced boost and power
- Further boost-related codes stored
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0643
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.