OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U063B

Lost Communication With Coolant Bypass Valve Actuator A

Rotary coolant valves are often moved by a smart actuator that takes its target angle over LIN and reports back. U063B covers the case where actuator A no longer replies. Mercedes-Benz uses it in the drivetrain controller N127 (PTCU, CPC3) for the control valve of the high-temperature circuit; bulletin LI20.00-P-076708 for the GLC 254 and the facelifted GLE 167 (model year 2024) lists U063B00 and U063B87 (message missing) together with codes for fan 1, coolant pumps and an exhaust flap on the same LIN line. The check engine lamp comes on, a coolant service message appears and the radiator fan runs flat out. For the GLC with PTCU version 22A the cure is new software; otherwise connectors and LIN wiring are inspected. Electrical faults of the valve drive itself are P0E75 to P0E7A.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 3B

Possible causes

  • Outdated drivetrain controller software (Mercedes PTCU version 22A) high
  • Damaged, chafed or corroded LIN wiring or intermediate connectors medium
  • Electronics in valve actuator A failed medium
  • Missing supply voltage or ground at the actuator low

Symptoms

  • Check engine light with coolant service message
  • Radiator fan permanently running at full speed and noisy
  • Further LIN codes (fan, coolant pumps, exhaust flap) stored together

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U063B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication