U063A
Lost Communication With Hybrid/EV Electronics Coolant Temperature Sensor C
Sensor C is the third digitally connected temperature sensor in the cooling loop for the hybrid or EV power electronics. It is found where a system splits the loop further, for example to give a DC/DC converter or onboard charger its own reading. U063A is stored when its frames stop arriving. No public manufacturer documentation names this code or the location of sensor C. California's OBD II rule lists inverter cooling inputs among the monitored parts, so a hybrid has to flag the loss. If only U063A is present while A and B still answer, a local fault at sensor C or its branch of the harness is far more likely than a bus-wide problem. The analog counterparts are P2B24 to P2B27.
Possible causes
- Open or chafed wire in the branch that feeds sensor C only high
- Sensor C connector unplugged after service work or corroded medium
- Sensor C electronics defective medium
Symptoms
- Hybrid or EV warning lamp
- Possible reduction of charging or drive power
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U063A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.