OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0639

Lost Communication With Hybrid/EV Electronics Coolant Temperature Sensor B

A second temperature point in the electronics cooling loop, labelled B, lets the controller compare inlet and outlet or watch a separate branch, and the pair is checked against each other by P2D2A. U0639 means that sensor B, read as a digital bus participant, has gone quiet while the bus itself is still working. No manufacturer documents U0639 publicly, so its exact mounting point stays vehicle-specific. CARB treats such inputs of inverter thermal management as monitored components under (e)(15.2.3)(B)(ii). While sensor B is missing, any plausibility check between A and B cannot run, and the cooling strategy falls back to sensor A alone or to a model. Wiring faults of an analog sensor B would appear as P2B20 to P2B23.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 39

Possible causes

  • Harness to sensor B damaged, for example near hoses or brackets high
  • Moisture or bent pins in the sensor B connector medium
  • Sensor B itself no longer transmits medium
  • Bus master controller fault low

Symptoms

  • Hybrid or EV system warning lamp
  • Correlation checks between the electronics coolant sensors disabled
  • Occasional power limitation on long climbs or fast charging

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U0639

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication