OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0633

Lost Communication With Fan 2

U0633 is the counterpart for a second LIN-controlled radiator fan. GM's 2025 table 25OBDG04B checks the frame CFM2_RSP and fails after 2.5 s of silence as Type B; 23OBDG07 and 24OBDG07 count three missing frames, and on those engines fans 3 and 4 have their own codes on another LIN line. In the Outlander PHEV 2023 Mitsubishi's fan 2 is the left-hand unit. Audi bulletin 2072000/1 for the 2020-24 Q7, Q8 and RS Q8 family lists U0633 with fan circuit codes and the warning of limited performance with engine speed capped at 2000 rpm; the harness rubs on the right front frame rail. GM bulletin 23-NA-102 finds it on the Duramax 3.0 together with other LIN devices. Fan 2 alone failing while fan 1 still answers points to its own branch or motor.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 33

Possible causes

  • Fan 2 harness rubbing on the frame rail or radiator support high
  • Loose or corroded fan 2 connector medium
  • Power feed or ground of fan 2 interrupted medium
  • Fan 2 controller electronics failed low

Symptoms

  • Remaining fan runs at full speed or noise from the fan area
  • Warning lamp; on Audi models limited performance and engine speed
  • Rising coolant temperature in slow traffic

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0633

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication