OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0631

Lost Communication With Engine Coolant Temperature Sensor 5

Sensor 5 is the highest-numbered engine coolant temperature input in the J2012 list and is found only on engines that monitor many coolant zones, for example block, head, radiator outlet and separate loops. U0631 records that the controller has stopped receiving digital messages from that sensor. No manufacturer documents it publicly. Because sensor 4 and sensor 5 usually sit on different branches, U0631 on its own points to its own connector, wire or sensor electronics, while both together suggest a shared data line or supply. CARB folds sensors that watch distinct coolant loops into the cooling system monitor, so the MIL is plausible. LIN messages carry a checksum, and a sensor that answers with bad frames counts as missing too. Expect a substitute value and cautious fan control.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 31

Possible causes

  • Wiring to sensor 5 damaged (open, short, chafing) high
  • Connector at sensor 5 corroded or not latched medium
  • Sensor 5 electronics failed or sending corrupt frames medium
  • Shared supply or data line fault (often with U0630) low

Symptoms

  • Check engine light
  • Fan running more often or longer

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0631

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication