OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0630

Lost Communication With Engine Coolant Temperature Sensor 4

Engines with split or multi-zone cooling may measure coolant temperature at more than three points, and a sensor that sends its value as a digital message instead of a resistance can be checked for silence. U0630 means the engine controller no longer receives such messages from coolant temperature sensor 4. No manufacturer documents U0630 publicly, and where sensor 4 sits is not standardised. Since 2021 CARB requires an approved monitoring plan when an engine judges its operating temperature from sensors placed in several distinct coolant loops, so a lost sensor counts as an emission fault. Such a bus sensor has just three wires (supply, ground, data), and those plus the connector are the first suspects. The controller then works with a substitute value, and the cooling strategy may become more conservative.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 30

Possible causes

  • Data, supply or ground wire to sensor 4 open or shorted high
  • Corroded or loose sensor connector medium
  • Sensor electronics failed medium

Symptoms

  • Check engine light
  • Cooling fan may run more than usual

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0630

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication