U062E
Lost Communication With A/C Refrigerant Expansion Valve Actuator
An electronic expansion valve uses a geared or stepper motor to set the refrigerant flow into an evaporator or battery chiller, guided by pressure and temperature readings instead of a thermostatic bulb. Units such as Egelhof's EXV and KXV accept their target position over LIN and carry a position sensor, so they can also shut a branch completely. U062E is logged when that actuator stops answering. No manufacturer documents U062E publicly. The consequences can reach the drivetrain: on Mercedes EQE and EQS models (series 294 to 297) a faulty chiller expansion valve Y140/1 triggered a cooling-system warning announcing reduced energy input, though there the valve hung open (code B3A0077) rather than going silent. Distribution valves are covered by U062A to U062D.
Possible causes
- LIN, supply or ground wire to the expansion valve damaged high
- Connector at the valve wet or corroded (often near the evaporator or chiller) medium
- Expansion valve motor electronics failed medium
- Software fault in the thermal or powertrain controller low
Symptoms
- No cooling at the affected evaporator or chiller
- Cooling-system warning, possibly reduced drive or charging power on electrified vehicles
- Heat pump unavailable
Inspection / repair
- Difficulty: hard
- DIY: shop recommended
What Pro shows you for U062E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.