OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U062A

Lost Communication With A/C Refrigerant Distribution Valve Actuator A

Heat pumps and battery-cooling circuits need valves that redirect refrigerant, for example hot gas from the outer heat exchanger to an inner one when the system switches from cooling to heating. Suppliers such as Egelhof build these as motor-driven switching valves that replace two or more solenoid valves and are commanded digitally, partly via LIN. U062A is set when actuator A no longer answers its controller. No manufacturer documents U062A publicly. How serious it is depends on what the valve feeds: BMW, for one, lit the MIL on the i3 for a jammed refrigerant shutoff valve in the battery cooling branch (its own code 21F0D0). Hardwired versions of valve A report P2611 to P2613, P266F or the mechanical fault P0EC9.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 2A

Possible causes

  • LIN, supply or ground wire to valve actuator A damaged high
  • Moisture or corrosion in the actuator connector medium
  • Actuator electronics failed medium
  • Software fault in the controlling module (reprogramming may be needed) low

Symptoms

  • Switching between cooling and heat-pump mode fails
  • No cabin heat from the heat pump or no cooling in one branch
  • Thermal system warning, possibly reduced charging or drive power

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U062A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication