OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0627

Lost Communication With A/C Refrigerant Temperature Sensor A

Refrigerant temperature matters most where a controller adjusts superheat itself, as with electronic expansion valves and heat pumps; it also guards against overheated discharge gas. U0627 is set once the digital temperature value from sensor A is no longer received. Many suppliers build temperature and pressure into one housing; Sensata, for example, offered such R744 sensors with LIN, PWM or analog output. If U0626 appears at the same moment, the shared plug, LIN line or supply of that combined part is the first suspect; if only U0627 is present, the temperature channel or a separate sensor is more likely. No manufacturer documents U0627 publicly. Depending on the strategy, cooling or heat-pump output drops or stops. Analog equivalents are P0EBC to P0EBF.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 27

Possible causes

  • Connector, LIN line or supply of a combined pressure/temperature sensor faulty high
  • Temperature channel or sensor electronics failed medium
  • Climate or thermal controller no longer polls the sensor (software or LIN master fault) low

Symptoms

  • Reduced cooling or heat-pump output
  • Heat-pump mode unavailable, auxiliary heater takes over
  • A/C fault message

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0627

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication