OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0624

Lost Communication With Coolant Pump B

Some engines carry a second electric coolant pump, for instance one that keeps coolant moving through the turbocharger after shutdown or feeds a separate heater or low-temperature loop. Which pump is B is decided by the manufacturer. No manufacturer documents U0624 publicly; GM uses U0623 and U062F for its LIN pumps instead. The code means that pump B no longer answers on its data link. Bosch's PAD2 and PCE 2.0 pumps illustrate the design: speed set by PWM or LIN and a built-in diagnostic function that reports faults to the controlling unit. CARB asks for an approved monitoring plan when an electric pump rather than a thermostat governs engine coolant temperature. Wiring and connectors come first; P261A to P261D cover the pump's control circuit.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 24

Possible causes

  • Signal, supply or ground wire to pump B damaged high
  • Fuse or relay feeding pump B open medium
  • Pump electronics failed, sometimes after overheating or a seized rotor medium

Symptoms

  • Warning lamp
  • Reduced heater output or higher component temperatures after shutdown

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0624

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication