OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0622

Lost Communication With Exhaust Gas Temperature Sensor Bank 2 Sensor 2

U0622 covers the second exhaust temperature measuring point on bank 2 when it is a digital sensor that transmits its value as SENT or CAN messages. The controller sets it once those messages stop or keep failing their checks, for instance after a broken signal wire, a lost 5 V supply or a fault inside the sensor module, an electronics box that on active sensors must tolerate up to 140 °C beneath the car. No manufacturer publicly documents U0622: GM's diesels with SENT temperature sensors have only one bank, and the Bentley V8 bulletins name only the sensors at position 1. CARB requires a dedicated code for a digital input that stops communicating, which is the role of this code. Judging by the documented neighbours, the harness routing near the exhaust is the first thing to inspect. Analog faults here are P2034 to P2036.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 22

Possible causes

  • Sensor wiring chafed or melted along the bank 2 exhaust high
  • 5 V supply or ground to the sensor interrupted medium
  • Heat-damaged electronics module of the sensor medium

Symptoms

  • Malfunction indicator lamp
  • Exhaust temperature for bank 2 sensor 2 missing in live data

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0622

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication