OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U061D

Lost Communication With Reductant Temperature Sensor B

Temperature sensor B is a second temperature input of the reductant system. Where it sits depends on the maker: at another spot in the tank unit, in the pump or supply module, or along the dosing line. Volvo's truck tank sensor, for instance, measures temperature at two points on its circuit board, yet sends everything over one CAN connection and reports a lost connection as U02A2 rather than with this code. U061D therefore belongs to designs in which temperature B arrives as its own digital message. If only B drops out, the controller can usually keep working with A but loses the cross-check between the two values and the heater control for that zone. No manufacturer publicly documents U061D. Circuit faults of an analog sensor B are P2ACC to P2AD0.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 1D

Possible causes

  • Wiring to the second temperature point (pump module or dosing line) damaged high
  • Connector of temperature sensor B corroded or not latched medium
  • Temperature sensor B or the module housing it failed medium

Symptoms

  • Malfunction indicator lamp
  • Line or pump heating may not work properly in frost

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U061D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication