U0616
Lost Communication With Engine Coolant Bypass Valve B
Valve B is a second electronically controlled coolant valve, for example one that splits flow between the block and the head or toward a heater or oil cooler; which valve carries the letter B depends on the manufacturer. No manufacturer documents U0616 publicly. The code means the controller has stopped receiving valid replies from that valve over its digital link, while valve A may still answer, so the fault is likely in the branch of wiring, the connector or the electronics of valve B itself. Suppliers such as Hella and Rheinmetall build these valves with LIN, PWM or SENT interfaces and internal position feedback. CARB requires a monitoring plan for engines that regulate temperature with more than one flow control device. P0E7B to P0E7E cover the electrical circuit of valve B.
Possible causes
- Damaged signal, supply or ground wire in the branch to valve B high
- Loose, corroded or wet connector at valve B medium
- Electronics in valve B failed medium
- Controller software or configuration does not match the fitted valve low
Symptoms
- Warning lamp, often without a noticeable change in driving
- Unusual warm-up behaviour or coolant temperature swings
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0616
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.