OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0615

Lost Communication With Engine Coolant Bypass Valve A

Engines with split cooling circuits often route coolant through an electrically driven valve that reports its position and status digitally. U0615 is stored when the engine controller gets no answer from bypass valve A. In GM's 2019 hybrid tables (19OBDG01) the valve sits on a LIN bus: once Run mode and at least 11 V have held for 400 ms, three missed responses fail the test as Type B, and the valve's own position check (P15C5) is suspended meanwhile. Ram's bulletin 08-171-26 for 2025-26 Ram 2500 to 5500 trucks links U0615 on the coolant three-way valve to a contaminated connector under the coolant bottle; the fix is dielectric grease, or a new valve plus pigtail. Drivers notice the lamp and weak cabin heat. Circuit faults of the valve are P2681 to P2683.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 15

Possible causes

  • Moisture or corrosion in the valve connector (Ram bulletin 08-171-26) high
  • LIN, supply or ground wire to the valve open, shorted or chafed medium
  • Valve actuator electronics failed (valve no longer answers) medium
  • LIN master in the engine controller faulty low

Symptoms

  • Check engine light
  • Little or no cabin heat
  • Engine warms up slower or coolant temperature behaves unusually

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0615

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication