U0612
Lost Communication With Intake Air Temperature Sensor 1 Bank 2
Bank 2 needs its own intake temperature sensor only where the engine has two separate air paths, as on V engines with one air box and throttle per bank. U0612 is the lost-communication code for that sensor 1 of bank 2. GM's 23OBDG07/24OBDG07 treat it as the bank 2 twin of U0611: the second bank's temperature message is missing, or its line is reported stuck high or low, and the MIL follows after two trips. Ford's 2024 gasoline summary, however, assigns U0612 to communication with its digital air flow sensor B (lost for more than 5 s), so on Ford vehicles the code points to that meter instead. P00AA to P00AE cover the analog circuit. Without the value the controller substitutes a fixed temperature.
Possible causes
- Wiring fault on the bank 2 intake sensor branch high
- Bank 2 temperature sensor or its host sensor failed (on Ford the air flow sensor B) medium
- Corroded connector on the bank 2 intake low
Symptoms
- Check engine light
- Little effect on driving; with Ford's air flow sensor B reduced response possible
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for U0612
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.