U0610
Lost Communication With Mass or Volume Air Flow Sensor B
Air flow sensor B is the second meter on engines that measure each intake path separately, typically one per bank on V engines with two air boxes. In GM's documents 23OBDG07 and 24OBDG07, written for an engine with two throttle bodies, U060F stands for bank 1 and U0610 for bank 2: the code sets when the digital sensor itself reports a time overflow or a maximum-period violation for 1.5 s with battery voltage above 9 V, and the MIL follows on the second trip. Ford's 2024 gasoline summary is an exception, filing its digital air flow sensor B under U0612. P010A to P010E concern an analog sensor B, and P010F compares the two meters. Without sensor B the controller relies on sensor A and models for that bank.
Possible causes
- Signal, supply or ground wire to air flow sensor B damaged high
- Air flow sensor B electronics failed or contaminated medium
- Moisture or loose terminal at sensor B connector medium
Symptoms
- Check engine light after the second trip on GM
- Uneven running or slightly reduced power
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0610
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.