OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U060A

Lost Communication With Manifold Absolute Pressure Sensor B

MAP sensor B is a second manifold pressure sensor, found for example on V engines with a separate intake plenum per bank or on engines measuring before and after the throttle. U060A applies when this sensor is digitally connected and the controller stops receiving usable SENT frames from it, whether because of a dead line, a broken frame or the sensor's own error code; Melexis' MLX90818, made for manifold and turbo pressure, sends reserved fast-channel values to signal internal faults. No manufacturer publishes a readable description of this code. The NHTSA index lists it with U0609 in an Audi bulletin for the 2023 RS 6 Avant, but that file is not readable. CARB 1968.2 requires a stand-alone code for lost communication on a digital input. P2A0A to P2A0E are the analog codes.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 0A

Possible causes

  • Open, shorted or chafed wire to MAP sensor B high
  • MAP sensor B electronics failed or reporting an internal error medium
  • Corroded or loose connector at sensor B low

Symptoms

  • Check engine light
  • Reduced power on the affected bank or intake path

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U060A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication