U0609
Lost Communication With Manifold Absolute Pressure/Barometric Pressure Sensor
A digital manifold pressure sensor sends pressure, often with an intake temperature value, as SENT frames; chips built for this, such as Infineon's KP276, add a status nibble with error flags and a CRC to every frame. U0609 is stored when those frames stop arriving or cannot be used. Ford's 2023 diesel summary defines it for the SENT MAP sensor: the SENT driver flags a communication fault, the data line hangs at low voltage, or the sensor flags an internal fault, checked continuously and registered after 5 s. P0105 is the separate code for a sensor whose status bit or reading is implausible. The NHTSA index lists a 2023 Audi RS 6 Avant bulletin covering U0609 with U060A. Load and boost then run on substitute values.
Possible causes
- SENT line stuck low, open or chafed, or supply/ground missing high
- Sensor reports an internal fault (moisture, oil or soot ingress) medium
- Corroded or loose sensor connector medium
Symptoms
- Check engine light
- Reduced power or limited boost
- Rough running or harder starting at altitude
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0609
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.