OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0608

Lost Communication With Throttle/Pedal Position Sensor/Switch C

Sensor C usually belongs to a second throttle body, as on engines with one throttle per bank or two throttles in parallel. Ford's 2020 to 2024 gasoline summaries spell this out: on dual-throttle applications the SENT sensor of throttle body B reports as sensor C, and U0608 sets with MIL and wrench lamp when wiring or the SENT device has been faulty for more than 4 s. P0225 and P0229 cover a self-reported fault or a brief dropout of the same sensor; oddly, Ford labels the matching shorted-line codes as sensor B. GM's dual-throttle calibration of 2023 and 2024 assigns U0608 to sensor 1 of the bank 2 throttle, 0.13 s, one trip, while that unit's second track reports as U0688. Losing one throttle forces the controller to limit both banks.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 08

Possible causes

  • Wiring fault on the SENT harness branch to the second throttle body high
  • Position sensor electronics of the second throttle body failed medium
  • Corroded or loose connector at throttle body B medium

Symptoms

  • Check engine light and, on Ford, wrench lamp
  • Reduced power, uneven running between banks

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0608

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication