OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0607

Lost Communication With Throttle/Pedal Position Sensor/Switch B

Position sensor B is the redundant second track of a throttle or pedal unit. On SENT throttle bodies both tracks often share one sensor chip and even one frame (the dual throttle format A.1 of J2716), so a broken line usually drops A and B together. U0607 alone points to a fault confined to the second channel or its decoding. GM's 2025 tables (25OBDG03A) assign it to throttle position sensor 2 with the same SENT checks as sensor 1, Type A. On a GM engine with one throttle per bank (documents 23OBDG07 and 24OBDG07) it pairs with U0606 on bank 1 when the line stays silent or pulse or calibration lengths fall outside the window for 0.13 s. Ford's SENT summaries skip this code. With one track left, plausibility checks are gone, so power is limited.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 07

Possible causes

  • Second sensor channel inside the throttle or pedal unit failed medium
  • Damaged SENT line, supply or ground (often sets U0606 as well) medium
  • Spread or corroded terminal at the sensor connector medium
  • Engine controller software decoding the second channel wrongly low

Symptoms

  • Check engine light, on GM in the first trip
  • Limited power because the redundancy check is lost

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for U0607

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication