OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U0604

Lost Communication With Fuel Pressure Sensor B

Sensor B is the second fuel pressure measuring point, for example a low-pressure sensor in the feed line of a direct injection engine or a second rail on V engines; which pressure it reads depends on the maker. U0604 flags that this digital sensor has stopped sending valid SENT frames to the engine controller. Nobody publishes a manufacturer description for this code. By analogy with Ford's SENT checks for oil and filter pressure sensors, the controller would look for driver errors, a line held high or low or missing frames and confirm after a few seconds. CARB 1968.2 requires separate lost-communication codes for coded digital inputs. P018A is the analog circuit code for sensor B, U0603 the counterpart for sensor A. Depending on the role, pump control or the second rail falls back to defaults.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number6 / 04

Possible causes

  • Damaged signal, supply or ground wire to sensor B high
  • Sensor B failed internally medium
  • Sensor A and B connectors swapped or loose low

Symptoms

  • Check engine light on
  • Hesitation or reduced power under load

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U0604

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication