U0603
Lost Communication With Fuel Pressure Sensor A
Fuel pressure sensor A reports fuel or rail pressure, which the controller needs for injection quantity and pump control. When the sensor is digital, it transmits over a point-to-point SENT line instead of an analog voltage, and U0603 means its frames no longer arrive in usable form: wire open or shorted, signal stuck high or low, CRC errors or an internal sensor fault. No manufacturer documents this code publicly; Ford's 2023 diesel and 2024 gasoline summaries show the same pattern for other SENT sensors (U0600, U0601) with 5 s to register. CARB 1968.2 demands a dedicated code for lost communication on such inputs. P0190 covers circuit faults of an analog sensor, U0604 the second sensor. Expect a fallback pressure strategy, rough running or no start.
Possible causes
- SENT signal, 5 V supply or ground wire faulty high
- Fuel pressure sensor electronics failed medium
- Loose, corroded or fuel-contaminated connector medium
Symptoms
- Check engine light on
- Reduced power or limp mode
- Hard start, stalling or no start
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for U0603
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.