U0602
Lost Communication With Particulate Filter Pressure Sensor B
Pressure sensor B serves a second particulate filter or a second measuring point, for example on engines with one gasoline particulate filter per bank. The code means its digital SENT output has stopped delivering usable frames to the engine controller. Ford's 2024 gasoline OBD summary lists U0602 with P245E in the check for SENT-type filter pressure sensors A to D, running continuously and needing 5 s to register; analog versions of the same sensors use the circuit low/high codes instead. CARB 1968.2 requires lost communication on a coded digital input to get its own fault code, apart from circuit and range faults. U0601 refers to sensor A, U0696 and U0697 to C and D. Filter loading for that branch must then be estimated without measurement.
Possible causes
- Damaged SENT, supply or ground wire to sensor B high
- Sensor B electronics failed medium
- Loose or corroded connector at sensor B low
Symptoms
- Check engine light on
- Particulate filter monitor for the affected branch incomplete
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for U0602
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.