OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U05C1

Invalid Data Received From Active Radiator Air Flow Control Module A

Besides shutters in the visible grille, some cars meter cooling air with flaps placed directly in front of the radiator, behind the bumper intake. Hyundai's patent US11225900B2 describes such an arrangement with two adjacent flaps between bumper opening and radiator plus an air guide steering air towards them. The J2012 list gives this unit its own module family, separate from the grille shutters, and U05C1 means module A delivers position or status frames that the engine or thermal controller rejects. No manufacturer documents U05C1 or its partner U02C0 publicly, so the threshold and lamp strategy are unknown. Because CARB treats active aerodynamic and warm-up devices as off-cycle CO2 technologies, a maker may handle the fault like the shutter codes; in practice the flap is parked open for safe cooling.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / C1

Possible causes

  • Flap actuator A electronics faulty medium
  • Connector behind the bumper wet or corroded medium
  • Flap blocked by debris or ice so the actuator reports implausible positions low

Symptoms

  • Warning lamp on some vehicles
  • Flap stays open, slightly higher consumption

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for U05C1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication