OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Network generic / SAE

U05B9

Invalid Data Received From Rear Radar Module C

A third rear radar is only needed on vehicles whose rear coverage goes beyond the usual pair of corner sensors, for example to watch longer flanks or the area directly behind. No manufacturer publishes U05B9 or the position of a rear radar C, and its lost-communication partner U02B8 has no public bulletin either. Where letters are documented, they belong to the outer units: Mercedes-Benz uses rear modules A and B for the outer left and right sensors of the 2026 CLA electric and reports them, when unconfigured, with fault type 55. U05B9 would follow the same logic for a further sensor: frames arrive, the content is refused. Configuration, calibration after bumper work and the connector are the first checks. Blind spot or rear crossing alerts may be partly unavailable.

SystemNetwork
Typegeneric / SAE
GroupU0
Range / number5 / B9

Possible causes

  • Rear radar C not configured or calibrated after replacement medium
  • Sensor position or cover changed by rear body repair medium
  • Wiring or connector fault at rear radar C low

Symptoms

  • Rear assistance warnings partly unavailable
  • Service message for driver assistance

Inspection / repair

  • Difficulty: hard
  • DIY: shop recommended

What Pro shows you for U05B9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 1 affected component(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication